"Thanks for the Great Service and
quick turn around on the parts for the
ZR. I got them over a week ago and got
the sled back together last weekend!
All is good now...works like it should!
" - Steve Allen
"I know that this has been said multiple times on here but hats off to sled-werx. Great service and great people. Replied to my email on a Saturday, wow! Spenc.
I forgot to add that they shipped my stuff from the US to save on shipping costs. They really care about the customer and making them happy.
Thanks again Sled-Werx " - Jason Neitzel
All Turbo/Supercharger Accessories & Electronics products including gauges
can be now found in our ACCESSORIES section -Accessories
Please note :
All Turbo/Supercharger Accessoires & Electronics including gauges and Programmers can be now found in our ACCESSORIES section -Accessories
NEW 2014 VIPER IN STOCK
iiiiiIf You Want Power?
See our Accessories
section below for Turbo Accessories
Garrett Turbos Big Power Sale CANADIAN PRICING example popular models GT2554R GT2560R GT2860RS GT2871R GT3071R GT3076R GT3076R-wg GT3582R GT4088R -internally & externally wastegated models available
-all turbo related products available!
EMAIL FOR PRICING
" To all Canadians, 2KOOL Performance is the ONLY place to buy aftermarket parts. I'm happy I found your web site because I was able to get aftermarket snowmobile parts that dealers here in Saskatchewan had never heard of. Prices were great and shipping was very reasonable. Thank you Brent, I will definitely order from 2KOOL again in the future. " - HCS Member Sequoia
Call or Email here in Canada to discuss proceedure for exchanging parts to eliminate Cross Border Brokerage fee's , delays and hassles
ProCross 1100T/Z1 Holeshot Turbo 100% Bolt In (Turbo Only) 100% bolt on $1549 without programming $2399 with programming
LOWEST PRICE IN CANADA on EVO
This is the turbo upgrade every ProCross 1100T needs - an inexpensive, direct bolt in replacement for the stock turbo! EVO has taken the stock turbo, grafted a billet 65mm intake wheel and a new intake housing onto the stock exhaust side of the factory turbo. The whole assembly is then precision balanced for maximum performance and turbo life. It comes preset with a 15 lb waste gate. The turbo is capable of 280+ hp at 8000' and 340+ at sea level. When installed, it looks identical to the stock turbo except for the larger intake. This is the ultimate sleeper modification! All heat shields remain in place. Turbos are sold on an exchange basis.
EVO Powersports Turbo Accessories
see our ACCESSORIES section
EVOLUTION Powersports power packages
Email us the LINK from EVO web site on the
package you would like
EVOLUTION Powersports power exhaust products
with either Bullet or
Magnum 'Quiet' silencers
Email us the LINK from EVO web site on the
package you would like
" Thanks again for your help with my EVO order. Everything looks great, you saved me a ton of brokerage and kept me up to date on my order which I really appreciated. " - Jim Truden
EVOLUTION Powersports "Shocker" Side Dump Exhaust
F, XF, & M series
800 CATS only $429 IN STOCK
Designed to prevent bogging in deep snow by exhausting out the side rather than underneath - We have virtually eliminated the dreaded right hand turn "bog" in the powder. The "Q" version is for areas where sound police are patrolling. We use advanced silencing technology to give you stock like sound levels while having a much sportier sounding exhaust. This silencer will last the lifetime of your sled and will never need to be repacked due to the stainless steel wool used for packing.
Z1 POWER UPGRADES example pricing HP5128 $1249 CND 420+HP Ball Bearing Turbo with B-Cover ( 2860/71 Upgrade) -internally gated, comes with choice of standard or high boost acutator
HP5130 $1299 CND 460+HP Ball Bearing Turbo with V-Band Housing
- Choice of .63 or .82 exhaust housing HP5530 $1399 CND 520+HP Ball Bearing Turbo with V-Band Housing
- Choice of .63 or .82 exhaust housing HP5830 $1599 CND 590+HP Ball Bearing Turbo with V-Band Housing
- Choice of .63 or .82 exhaust housing
IN THE WERX
Z1 Big Turbo Header The 1st Bolt on 'Cast Stainless Header'
(non tubular ) to allow for High Boost! Stay Tuned for details with Canadian Pricing!
Full Throttle Z1 Pistons & Rods!
see our ACCESSORIES section
" Finally a Canadian Business that doesn't use a stupid Shopping Kart! Thank you for your personal approach to business! I appreciate that I was always dealt with professionally with a live person through email and by phone. All other like businesses today seem to think taking your money through an online shopping kart should be the priority?? At 2KOOL I feel like family!
Awesome Service! " - Cory Wilmont
if purchased through sled-Werx Racing
YAMAHA NYTRO 2008+ models 190 HP kit only $4599 reg $4699 240 HP Kit only $6799 reg $6899 270 HP Kit only $7199 reg $7299
YAMAHA APEX 2011+ models 200 HP Kit only $5899 reg $5999 290 HP Kit only $6799reg $6899
315 HP Kit only $7799reg $7899
YAMAHA SRViper 2014-2015 models only 190 HP Kit only $4499 reg $4599 270 HP Kit only $6599reg $6699
FINAL CANADIAN SALE Pricing Shown
Ski-DOO 1200 TURBO 2009+ models 180 HP Kit only $4599 reg $4699 240 HP Kit only $6799 reg $6899
Arctic Cat 1100 2012+ models
194 HP Kit only $1649 227 HP Kit only $3299
MCX Display Unit
Shows: Oxygen (lambda) Air/fuel ration Exhaust temperature, Battery Voltage RPM,Turbo pressure, Throttle position only $1195 Purchase with Turbo kit at LEFT and save $100
off list price shown ONLY through SLED-WERX Racing! With the MCX EFI box, Display and a computer you can: Show values when driving
, Diagnostic your turbo driving , Download and analyze info , Tune Fuel map , Tune Turbo pressure map, Check values
" I just picked up a new yamcharger, ulmer A-arm bushing kit and a kick ass trail terminator clutch kit. The guy is always available, his service is unbeatable and price is right there with it. I'll definately buy from Spenc again in the future " - HCS member nickrx-1
GFORCE YAMCHARGER only $1949 Canadian! Fits All Apex including 2011
Bolt on 20HP! - adds only 5 lbs! - quick 3½ hour install! PCIII & PC5 maps Available!
Sled-Werx TRAIL TERMINATOR
clutch kit only $379 reg $399
(price only applies if purchased with Yamcharger )
- FREE SHIPPING nationwide!
through SLED-WERX Racing!
hood intercooler vent only $30 air/fuel ratio gauge only $300 boost gauge only $75 water temp gauge only $80 clutch kit only $373 gearing only $153
ULMER Racing Supercharger kits
200HP 7psi only $5395
140HP 11 psionly $4995
210HP 7 psionly $4795
215HP 7-8 psionly $5495
"I just recieved the package. Everything is there, great service, good price and fast delivery. I will recommend you for sure.
Thank you very much" - Eric Leclair
"Just received my CPI pipe set and couldn't be more pleased! From the very first email response I could tell this was a class act opperation! Thanks for saving me time and expense from cross border shopping. You will be getting all my future sled part orders!" - Jason Skakum
Rev 800 Turbo Kit Site SPECIAL only $4589 -208 hp at 9lbs Boost
includes everything required
plus HP tubro pipe #S8RTUR
for client build with
pics and video clips!
800R XPTurbo Kit 219 HP at 10lbs BOOST Site SPECIAL only $4889
D&D Z1 BIG TURBO KIT 09-10 Z1 Stage II Turbo with Inter Cooler 28/60 Kit( comes with adaptor plate for stock manifold ) only $3495
Turbo upgrads available example:
28/71 or 30/71 upgrade add $250
F1000/Xfire Turbo Kit only $5999 359.3hp at 10lbs with race fuel on F1200
413.7hp at 15lbs with race fuel on F1200
Running 8.30's at over 160mph!
same kit used on the World's fastest twin is now available to the public!
PUSH TURBO Systems
Plug n Play Turbo Kits ski-doo 1200 only $4995 ( shown at LEFT details at RIGHT) ARCTIC CAT kits M1000 only $5695 M8 BIG BOR 900 only $5695 M8 only $5695
ski-doo 1200 Kit includes:
• TiAL 28-68 with HTA billet compressor wheel • Polished compressor housing
• V band stainless exhaust housing with external waste gate
• TiAL light weight compact 38mm V band waste gate (not in picture)
• 3" polished stainless steel exhaust with quiet stainless muffler
• PUSH TURBO TUNED EFI controller
• BDX adjustable blow off valve
• High volume fuel pump
• Rising rate fuel pressure regulator
• Boost controller
• Fuel Pressure Gauge
• Boost Pressure Gauge
Turbo Kits M7 up to 265HP on 14lbs boost
M1000 300+HP on 14lbs boost
GT-25 250hp/GT-28 up to 400hp available Apex only $4999 Nitro only $4999 Polaris Dragon & RMK only $4625 M/F1000 only $4899 M/F 8 only $4599 Find a lower price , call us we'll beat it!
Apex kit shown top LEFT
M Series shown bottom LEFT
F Series shown Far RIGHT
These Boondocker turbo kits now come complete with turbo, control box, stainless steel header, Snorkel Air Filter, inter-cooler & Boost contoller
"A group of our friends from Quebec recently purchased MPI supercharger kits from you and I just wanted to say the service was excellent! Thank you for saving us a ton of money in brokerage fees and for such a hassle free excellent shopping experience!" - Jean Couture
Show us any dealers lower price by email and we'll beat it!
"Great service and product always in stock every time I order. Shipping from Canada is great for us Canucks and saves time and money. Support these guys so that they are around to provide great service and parts far into the future " - HSC Member brookes 180
Mountain Performance 2014 VIPER
Stage 1 with trail friendly muffler 185-190HP 5-6psi
( on pump gas ) only $4595 available for order now!
220+HP 10-11psi Stage 2
with fuel pump upgrade
head shim and injectors upgrade
only $5595 coming soon!
on new VIPER kits if purchased
through SLED-WERX Racing
here in Ontario
TAKING ORDERS NOW!!
Mountain Performance 08-10 Nytro Stage 1 with Bypass BOV & Cold Air Kit 3cyl Fuel Injected kit 220+HP 11psi only $5095 280+HP 15psi Stage 2
with fuel pump upgrade
Shop in CANADA and SAVE!
2006-2011 APEX Supercharger now with free BOV Stage 1 240HP 10psi
only $5295 Stage 2 280HP 14+psi
with fuel pump upgrade
only $5999 Stage 2B 300HP 18psi Stage 3 350HP 14-25psi
( 2B & stage 3 pricing on demand )
-Dependable Unmatched Dyno Proven HP -Instantaneous Throttle Response! The Best Value / Most reliable forced induction systems on the market today! Limited 2yr Warranty on Supercharger unit
2011 model kits
available! The only difference in this kit from the 06-2010 kits is the gems controller. It will piggy back at the injector instead of the big grey plug. - darren @MPI
NEED TURBO INFORMATION?
-for all Turbo related questions CLICK HERE
CutlerTurbo Kits 2012+
Stage 1 only $4499 Stage 2 only $5399
Stage 3 only $5999
M8 (shown bottom LEFT ) Stage 1 only $4299 Stage 2 only $5299
Stage 3 only $5799
Complete bolt on kit. For those of you who are looking for Monster horsepower and Monster torque. Kit includes new CPC 11 port high performance cast cylinders, billet head with your choice of compression inserts,102.5 mm forged pistons & ring kits, gasket, O rings and hardware.
Cutler M8 & M1000 Performance Kits
Include ACT Diamond Drive Conversion Kit, CPC Adjustable Cam Arms, CPC High Flow 4" intake, VForce Reeds, Attitide EFI Fuel Control, SLP Single Pipe Y pipe & Silencer only $1777
"After taking the advice of friends and having the best shopping experience that I can remember I will be recommending Sled-Werx Racing to everyone I know!
Thanks again for all your help! - Steven Patterson
METHANOL INJECTION KITS
"Thanks for helping me with my Coolingmist order. My friends will be ordering soon too, they've head of your excellent service and were already buying their Atv and Off Road Truck parts from you but didn't know about
the sled division" - Trent Borgeonson
COOLINGMIST Water Methanol Injection example: Stage 1 kit activates based on boost. The adjustable boost pressure switch turns the high atomizing 250 psi pump on at a user set PSI. The 1 quart tank will fit most snowmobiles. This kit includes a M2, M3 and M5 jet to cover 200-500 HP for any turbo 2 to 4 cylinder snow mobile. If you do not need the 1 quart tank please email or call us and we will deduct $20 from the price. The tank dimensions are: 4.4" x 7.74" x 3.62" all mounting hardware is included. only $325
CMGS Autolearn Kit
INCLUDES 200-250 PSI RECIRCULATION STYLE PUMP AND FULL FAILSAFE. only $659( your choice of tank )
This kit integrates an autolearn failsafe that will tell you if there are any problems such as hardware failures or clogs. The high quality stainless steel solenoid ensure you will never have a priming problem and the super atomizing injector ensures the highest performance kit on the market. The CMGS is a 52 MM gauge that displays boost or BAR upto 30 PSI. This kit offers the most advanced algorithm for injecting the correct amount of fluid at the exact time needed. Furthering your performance is the ability to change the settings for fine tuning. Read below to see the advantages to this clean, simple, high performance kitWater Injection System, Carburetor/ EFI, Supercharger, Turbocharger
Includes your choice of 1 quart, 2 quart tank (or 1 gallon for those with more room)
- comes with failsafe box that performs failsafe function
- all in 1 progressive 52mm guage is a progressive control plus boost guage
replaces flowmeter this has been found to be more Reliable
-comes with CM5 nozzle standard, can be reduced at time of order
-CMGS Controller w/30 psi guage only $260
add $35 for 100 psi gauge -CMGS Controller & Failsafe only $389 Boost Pressure Switch only $32 CM5 nozzle only $38
ALL COOLINGMIST PRODUCTS AVAILABLE AT LOWEST PRICE IN CANADA!
Z1 "Meth Bomb" Methanol Injection Kit(shown at RIGHT )
With tank - only $775 Without tank - only $600 This kit comes complete with aluminum tank, pump, and all other necessary hardware to install the kit. this kit will allow you to run higher horsepower/boost levels with lower octane fuel
AEM Water Methanol Injection #30-30001 gallon tank complete kit only $399 #30-30015 gallon tank complete kit only $399
Water/Menthanol FAILSAFE Device #30-3020 only $259 see all available gauges
on our accessories page
-Complete Kit, everything is included -Progressive controller driven 150 PSI pump - 1 gallon tank with integral fluid level sensor - Dash light for system status and low fluid warning - Alcohol Compatible ( up to 50% in solution with water )
- Progressive controller, provides boost dependend variable flow
- Provdes output to either decrease timing or boost if the system runs out of fluid or detects an error
- kit includes three jets to match your power requirements
AEM’s Water/Methanol FAILSAFE Device is the most advanced water/methanol failsafe device on the market. It actively monitors the injection system’s ENTIRE flow curve to compensate for failure under ANY condition, allowing you to use your water/methanol system with complete peace of mind. If you have a water/methanol injection system or are considering one, you will not find a more advanced failsafe device on the market than the AEM Water/Methanol FAILSAFE Device
ON RK TEK
NOTE: For MPEM re-curve option you'll need to send into BRP Racing directly - As per RK TEK
For 08 - UP 800R motors RK TEK ECM custom re-curve $140 CND
800R to 860R kit shown
RK TEK SKI-DOO Big Bore Kits prices below include cylinder port
/wrist pin bearings. 800R to 860R $2150 180HP kit 800 to 827cc $2050 172HP kit 700 to 738cc $2170 150HP kit 700 to 738cc $1470 138HP kit 600HO to 738cc $2370 150HP
500ss/TNT 664cc $1775
CLICK HEREfor more info on kits and what is required for exchange - Thank You
800R Ypipe Ceramic Only $295 works best with drop in piston kit!
bearing kits available
HO and NON HO applications
Custom base gaskets available
RK TEK SKI-DOO 800 Drop In Piston Kit
All series III 800 engines only $845 800R kit (fits all 800R engines including 07 summit, as well as 08-2013 PTEK )
This piston and head kit can be used with ANY year 800 Twin. If you just "drop-in" this kit with no cylinder porting... power-fade and ring flaking problems VANISH!! with this kit. 15-20 hp over stock
Custom ECM Recurve option: For 08 - UP 800R motors
RK TEK ECM custom re-curve add $140 CND Make payment to us here in Canada on drop in kit and ECM recurve then you mail your ECM directly to RK TEK with a note/letter including your NAME and PHONE # telling RK TEK that your ECM is for a
2KOOL PERFORMANCE / Sled-Werx Racing order. We provide the mailing address for RK TEK after receiving your payment. This avoids Canadians all Brokerage fees /Hidden fees/and Customs delays
RK TEK SKI-DOO
Rotax Series IV
800R Billet Head only $450
RK TEK SKI-DOO Billet Head Kit for all 2000-2007 twins only $450
Canada's #1 Source for
High Performance Sled Products
FUEL CONTROLLER IS REQUIRED for all
2013 through 2015 models
POLARIS 800CFI Drop In Piston Kit
only $845 12HP gain
POLARIS 800CFI Drop In Domes
only $113 each
POLARIS 800CFI BIG BORE KIT
POLARIS 800CFI Replacement Pistons
only $395 per set
POLARIS 800CFI Dragon/RMK
PRO BILLET HEAD
There is NO DOUBTthat this mod is the best mod for the money you can do.
Reliability is NOT compromised in any way, shape, or form and the cost is VERY affordable.
It WILL outperform ANY other "Bolt On" product you can ,currently, buy for this engine!
After all the failures at lower elevations with the 2008 Stock Head We have decided to release our Torque-Line Billet 800 CFI Head to the public.
This head will gain some much need cooling and add about 10HP on top end..
This head is especially beneficial when making a big bore engine or in a turbo application!
RK TEK SKI-DOO Mach Z 1000 Billet Domes only $235
Increases the HP and Torque output at ALL RPMs. You get a broader power-band, increased power output, and better fuel economy Most saught after domes for the MACH Z 1000
RK TEK Arctic Cat Big Bore Kits M8 to M9 only $1966 M7 to M8only $1840
M8 Drop in Piston/Head kit only $775
CLICK HEREfor more info on kits and what is required for exchange - Thank You
FREE SHIPPING on all RK Tek Big Bore kits. You send in your parts to us as described on RK TeK's web site and we take care of you the rest of the way! ( offer does not include drop in piston kits)
RK TEK Arctic Cat Laydown Quad Heads
F8/M8 only $465
F8/M8 - head & base gasket 15HP bolt on kits - only $495
-There is NO other 'Bolt On' mod you can add that will provide the gains this head will
-Top End speed is increased by 7-10 MPH *Clients who have bought this item are estatic at the over-all performance improvement in thier sleds
F7/M7 Laydown Billet Head only $465
One of the best aftermarket performance products available for the powerful F7
RK TEK ZR 800-900 Twin Billet Head only $465
RK TEK's Torque-Line 800 / 900 Cat twin head is a TRUE performance enhancer. Bolting this head on was good for 3 lengths in a race and over 100ft when hill-climb testing. In addition to the power enhancements, torsional twist is reduced and cooling increased
D&D 800 SHIM KIT fits 2007-2009 F8 / M8 / XF800 / XF800R includes shim, base gasket,
2 degree timing key
-with head exchange only $249
-without exchange only $589
( includes new head )
All Heads From D&D available just emails us with whatever you need. Many other popular D&D products are on the site down below
CPI REV 800 Billet Head kit
2001-08 models only $310
Choose high or low altitude and custom compression ratios
CPI Polaris 700-800 Billet Head kit
1998-2005 models only $339
Choose high or low altitude and custom compression ratios. Order yours today! Currently available for Polaris 700 & 800
There it is - where my facination for snowmobiling started - age 3and all wedged in between my
Mother and Father on a Sno Prince
a 19hp single cylinder!
BIKEMAN Mach Z 1000 Billet Domes only $189 for set low elevation High elevation
Wake up your Mach with these new BMP billet domes. Low end hesitation is eliminated and the midrange pull is unbelievable! 4-5 hp gain!
" Thanks for the wicked service and quick replies. It is appreciated and thanks for covering shipping too! . " - Adam Rowe
BIKEMAN POLARIS 800 CFI Durability Kit only $549
Durability kit using taller pistons for your 800 CFI! Great performance and reliability gains with this kit! Same kit fits all models 2008-Up. The kit comes with two new Teflon coated pistons, rings, wristpins, circlips, longer cylinder bolts, machined spacer, longer dowel pins, and two base gaskets. No fuel controller needed. Want even more? Add our billet head kit for 160 hp and still no fuel controller needed on Pro-R models (Ethanol setting is recommended)
BIKEMAN Rev 600 & 800
including NEW XP Billet Head Kits only $399
These BMP head kits Fit all 600 & 800 Rev & Summit Rev 800 Motors. Provides increased cooling and a quicker throttle response 4-5 hp gain!
BIKEMAN F1000/M1000/F8 & M8 Billet Head Kits Site SPECIAL only $399
Added a full 8 hp on BMP test sled with unbelieveable acceleration and throttle response.
The best part is that compression stays virtually the same as stock for excellent reliablility. This head has twice the cooling capacity of stock due to unique cover and dome design
BIKEMAN F7-M7-Xfire 700 F6-M6-Xfire 600 Billet Head Kits only $399
5-7 hp gain for 700cc
4-5 hp gain for 600cc
BIKEMAN Polaris 600/700 CFI Billet Head Kits only $399
2007-08 600/700 CFI and Carb motor. These kits replace the stock head with a billet head cover for better cooling and uses interchangable domes. You will notice an instant improvement in how fast the motor revs and responds. 4-5 HPon 600, 5-6 HP on 700 though out the power band for flat landers and 6-8HP on 600 , 7-9 HP on 700 - gains for high altitude applications
STRIAGHTLINE Rev 600 & 800 Billet Head Kits only $389
Rev XP Billet Head Kits
800R, 600 SDI.500ss TNT only $380
Adds 4-6hp. Best looking head on the market. This head helps substantially with cooling because of it's large cut-outs around the domes. The head comes complete with the new improved combustion chamber, for better fuel efficiency and increased mph.
My first Polaris( above ) Had more hair back then. Below my good friend Chris Scott who was scared stiff that day on his first time on a sled and we were only doing 90mph on the backroads For the record- we're not HOMO's
STRIAGHTLINE 05-07 Ski-Doo MACH Z
Pump Gas Inserts only $189 for set
Improved Combustion chamber design produces 5HP improvement over stock
Pump gas safe!
STRIAGHTLINE Ski-Doo 800R Sleeper Head only $250
You get the same high performance domes as the Billet head, but with the stealth look! Inserts are available in Pump Gas, Mountain and Race Application, making it easy to pump up the compression for mountain riding or beating your buddy lake racing. ( Sleeper head requires exchange )
SLP Fusion 900 Billet Head Kit only $349
Obviously the Fusion is pretty underpowered ( right Mel? ), but with this inexpensive SLP head kit you can improve low end throttle response and midrange acceleration 3-4 hp gain!
SLP Polaris Cheater Heads
800 Twins only $309
CLICK HEREto pick proper head part #for your application , then email or call - thank you
SLP Ski-Doo Power Dome
800R Rev & XP Billet Head Kit only $359
increase of 7 horsepower peak and 6-12 horsepower midrange.
It also increases torque by 6.7 ft/lbs
SLP POLARIS 800 CFI
Billet Head Kit only $359
Speedwerx Billet Head Kits new 09 pricing in effect Firecat, F-Series, M-Series & XFire only $509 ZR & ZL only $549
In Ontario On Speedwerx Billet Heads
Interchangeable Dome Technology which allows you to adjust your machine to run at different elevations or from trail to the race track!
For Head,Motor & Pipe Mods
requiring stock parts
read details at RIGHT
Cutler Perfomance, RK TEK
For any kits requiring OEM parts to be sent into Vendors from Canadian Customers We have you Covered!
After making payment on US products with us here in Canada you then ship your parts to be modded or altered directly to the Vendors with a letter stating they are for a 2KOOL Performance Sled-Werx Racing order. The vendors after modding or altering your Stock parts then send your products to our US facility, we bring into Canada and ship back to you from our Ontario location No border hassles, No Brokerage fee's
no hidden expenses!
BIKEMAN F7/M7 Quiet Performer Kit 160hp only $1049 Buy in Canada and save!
FULL PORTING JOB TO BOTH CYLINDERS INCLUDING THE EXHUAST VALVES, PLUS HEAD MOD TO INCREASE COMPRESSION RATIO. A BIG FLOW INTAKE FOR THE AIRBOX, A 2 DEGREE OFFSET TIMING KEY TO ADVANCE TIMING, AND BMP PIPE MOD TO YOUR STOCK PIPE FOR A COMPLETELY STOCK APPEARANCE. ALSO INCLUDES A bmp ADJUSTABLE BILLET PRESSURE REGULATOR FOR THE FUEL PUMP AND A LIQUID FILLED PRESSURE GAUGE.
" Great Price, Great Service - will be recommending you to all my friends and I'll personally be back for more parts in the future! " - Trent Bowles
SITE SPECIAL 2014 YAMAHA Viper
for stock header $379
ORDER NOW! to avoid delays
add Dynojet PC5 #22-057 for only $349
if purchased at same time (exclusively through sled-werx racing only)
HAUCK Husher Dual Pipe Phazer Exhaust! saves 7lbs , adds 3HP (top RIGHT) only $879 Phazer single pipe kit only $495 Phazer 'GHT-R-Done' kit saves 10lbs adds 9-12HP only $1200 includes Dual Pipe System, Air Box Pods, Fuel accelerator and clutching
Husher 08 FX Nytro 'GHT-R-Done' kit only $1200 (shown at LEFT ) includes single Husher silencer,K&N Power up Kit, Fuel accelerator and #5 clutch kit
GHT-R-DUN Exhaust Silencer RX1 & APEX(shown at LEFT ) saves 13lbs on RX1 , 9lbs on APEX
adds 7HP on RX1, 3-4HP on APEX only $550
Viper HUSHER triple pipes (at LEFT) adds 31HP! only $829 ceramic coating add $375 CAD -Kit includes pipes, flanges, springs,
and super cool head gasket
ON HAUCK Performance
GHT-R-DUN kit RX1 & APEX ( above) saves 16lbs on RX1, 9lbs on APEX
adds 10-12HP on RX1, 8-10HP on APEX only $1200
RX1 & APEX GHT-R-DUN Kits include: APEX- Hauck Silencer, Hauck Fuel Accelerator, Advance Timing Keyway, #5 Clutch Kit with new VX Weights RX1 - Hauck Silencer, K&N Power Up Kit, and competition crushing #6 Clutch Kit. Also includes a jet kit, and stainless steel "Y" pipe
FX Nytro Header Pipe adds 7HP! only $499 bolt on and go! bolts to stock or Husher Exhaust
EXCELL Yamaha Phazer 2007-2015 Replacement Header Site SPECIAL only $399.99
You can now replace just the Header without buying the OEM Yamaha $1100.00 complete one piece Exhaust. Easy installation Instructions. We feel the main cause of Premature OEM Flex coupler Brakeage is the Header Sub Frame mount is not located correctly, which in turn the Header Flex Coupler is not in a Neutral Position and not leaving enough room for Heat Expansion causing the Coupler to fatigue and crack. We have Moved the Bracket back 15.00 mm allowing Flex Couplers to be able to move freely back and forth under running Temperature changes. The Header is Manufactured out of 304 Stainless Steel and Tig welded. After many Hours of testing and Dyno Runs we are not claiming any Extra HP because Yamaha didn't leave anything on the Table with the Stock Header for the Phazer Model
Yamaha Viper/Arctic Cat 7000
XV7 Performance Silencer
Site SPECIAL only $399.99
2014-15 SR Viper/Arctic Cat 7000
Header to Silencer Reusable Copper Gasket $24.95
Yamaha Viper/Arctic Cat 7000
XV7 Viper Intake Site SPECIAL only $399.99
The Intake Tube of the XV7 Cold Air Intake System is strategically placed beside and equal with the radiator, and behind the front hood vents. This positioning pulls cold external air into the air box instead of relying on the stock lower air box opening that only has access to warm, often hot, air that passes through the radiator and around the engine. The stock opening in blocked to prevent this hot air from entering the air box. On average, a 1% observed horsepower gain is produced for every 10 degree F drop in intake charge temperature due to increase air density. Additionally, moving the location of the inlet reduces the air resistance and provides a more direct route for the air. With these modifications there was a significant increase in mid-range HP and torque in the heart of the power curve where corner-to-corner acceleration is derived. At wide-open-throttle (or WFO if you like) air captured by the front louvers is rammed and compressed into the Cold Air intake tube, adding to additional peak HP and torque that are not measurable from a stationary dyno calculation.
Yamaha Copper Exhaust Donuts $28.95 each
Fits - RX1 Rage Vector Nytro Fxnytro All Years and Models
2006-2010 Apex Models
EXCELL Apex/Attack Stainless
Exhuast kits - WILL FIT RX1 ( must use APEX rear taillight kit from Yamaha ) adds 5 HPdyno proven, saves 13lbs! ( shown top LEFT/ and at RIGHT) only $799 NOTE: includes rear side body pieces availabe in black only with black end caps for 2011/2012 ALSO- blue & red end cap as shown are NOT AVAILABLE anymore
BUY IN CANADA
Apex/RX1 Mountain Lite Exhaust ( shown below )weighs 6lbs
only $549.99 Sold Out
polished Stainless Headers adds 6HPdyno proven ( shown at LEFT & at RIGHT MIDDLE
in comparison to stock ) SPECIAL only $249
EXCELL 2008 FX Nytro
Stainless Header back Exhaust Kits ( shown bottom LEFT ) only $849 with full plastics only $1049 Adds 8-10hp! Ulmer Clutch kit add $375 Sled-Werx Clutch kit add $389
plastics kit only $245
Apex Stainless HI FLOW Header NOTE: Apex header fits 2006-2010 only WILL FIT OEM or Excell Exhausts only $549
oem header donut gasketsadd $60
rear side body pieces availabe in black , blue, red or silver stripe
Contact us today for all your EXCELL Motorsports needs. Simply click on the EXCELL logo at LEFT and then provide us with the part #'s/ Description of the items you require
EXCELL FX Nytro
Stock Muffler HI FLOW Header Site SPECIAL only $399 Adds 7HP
Stepped Header Tubes
Hi Flow merge collector
2" midpipe ( stock 1 3/4" )
6HP and 400rpm gain stock DB Levels
recently dyno'd at Dynotech Research at 7.5HP over stock
in Canada ON BENDER
BUY IN CANADA & SAVE!
RX1/ATTACK/APEX Silencer Only $649 saves 7-11lbs -kits available in Mountain (loud) Or Trail
-Use factory heat shields for stealth appearance
Yamaha Stainless APEX and NYTRO
Y pipes/headers Only $499 comes with new donut gaskets!
Apex graphite exhaust gaskets only $40 Nytro graphite exhaust gaskets only $30 NOTE: Apex header fits 2006-2010 only Made to replace the factory Titanium y-pipes that crack & break, the Bender Racing Y-Pipe kit is made of high strength stainless steel to resist breaking. Made as a direct replacement for the factory y-pipes ours will fit a stock machine or can be used in conjuction with our performance silencer NEW GASKETS INCLUDED. SOLD IN PAIRS
Mild Steel APEX Y pipes available Only $399 comes with new donut gaskets!
99-01 Phazer Single Pipe Only $369 15% more HP
You really won’t want to let go after a few miles on your Bender piped Phazer, with 15% more HP! Easy install; just bolt it on and hit the trail!
" I have never bought anywhere else since finding 2KOOL Performance. " - Corman Browntree
Viper VIP Triple Pipes & Clutch Kit Pipe set Only $849
Clutch Kit Only $205
These pipes with clutch kit
add over 30 hp!
02-05 Viper only $39.99 each
rear heat exchanger only $179
Stainless NYTRO Silencer Only $499
saves 1/2 the weight of stock
system , adds 4-5HP
BENDER RACING\'S NYTRO SILENCER IS MADE WITH HIGH QUALITY STAINLESS STEEL WITH THE QUALITY YOU HAVE COME TO EXPECT FROM ALL BENDER PRODUCTS. THIS IS A SLIP ON SILENCER NEEDING NO MODIFICATIONS TO INSTALL. COMES WITH ALL GASKETS AND HARDWARE NEEDED TO MAKE FOR A FAST AND EASY INSTALL
RX1/ATTACK/APEX/SRX Silencers painted only $249
Ceramic only $299 - available in Mountain (loud) Or QST (quiet)
- 2-3 HP gain with exceptional weight savings
Here's a pic of 2 site-supported sled builds that made ALLOT of people FASTER!
Mach Z 1000 Silencers painted only $249
Ceramic only $299 - up to 4HP gain - 9lb weight savings
ULMER Racing Yamaha VIPER /
Arctic Cat 7000 VIPER Quiet Silencer 7-8 HP
5lbs lighter than stock only $299
Yamaha VIPER /
Arctic Cat 7000
Stainless Performance Header 11 HP gain when used with
Quiet Silencer only $699
CLICK here for Nytro Exhaust
Install Video CLICK here for Nytro Exhaust
NOTE: silent core
no longer has screen
(as shown at right)
BARKER'S Exhaust Yamaha SR VIPER / Arctic Cat ZR 7000
Stainless Slip On Exhaust SITE SPECIAL Limited Time Canadian Money at Par on this Product! Slip on Exhaust 6HP Only $530 quiet core recommended only $20
3 in to 1 header Only $595
3 in to 1 FULL SYSTEM 10HP Only $999
We provide both Barker Fuel
Controller and PC5 with mapping!
NYTRO Slip On IN STOCK
#1 selling Nytro Exhaust! Only $408
claimed 12HP with fuel Mapping!
Slip On Only $408
quiet core only $20 IN STOCK ( shown - no longer has screen)
Barker's Fuel Controller
only $299 with mapping ( shown at far LEFT )
"Received my Barker's Exhaust and installed it. I'm very happy with it. Thank you for making this great exhaust available to us Canadians for the same price as the American's pay " - Graham Whyte
Barker's Made in the USA full systems and slip-ons improve peak horsepower without requiring major engine modifications, and eliminate the sudden fall-off that afflicts most stock systems near redline. This increased over-rev is particularly useful in competition. These systems have been designed to bolt in easily. This is the quickest, most cost-effective improvement you can make.
Construction: 304 Stainless Steel, tig welded with seam-reduced interior surfaces for smooth flow
Power: Reverse-cone megaphone with pulse-wave tuning technology for superior peak horsepower, enhanced over-rev and improvements throughout the rev range. Typical peak HP gain is 10-25%.
Sound level: Typically 103 dB without the silencer, and 94 dB with Quiet Core insert (with a loss of only 1.5 HP you might want to run the Quiet Core all the time!).
"I received my package. I'm very happy thanks for the service. I will install them this weekend! Have a nice winter and I will call you if I need something else. Very good service! " - Samuel Couillard
in Canada ON CRANK SHOP
jjjj Buy in Canada and Save!
BIKEMANMACH Z 1000 Stage II clutch kit recommended
- see below for pricing
The CRANK SHOP MACH Z 1000 Twins with dual silencers $775 silencers weigh 6.5lbs with single muffler $799 muffler weighs 9.5lbs
REV 800HO Twins with dual silencers $679 with single muffler $705
MACH Z 1000 Twins
15 HP and a lot more grunt! You will need a Boondocker EFI box sold seperatly to increase the fuel delivery. Boondocker #1500-0111 for SKI-DOO EFIIN STOCK see below for pricing information
Best Price on CRANK SHOP
"I just received my Parts. Thank you for your good and fast service. I will do business with you again soon" - Patrick Dube
The CRANK SHOP Ski-Doo 1200 4-Tec Header ceramic steel weigh 5.5lbs,
fits into stock silencer only $699
non polished stainless 6.5lbs, 12-13 HP gain,
fits into stock silenceronly $800
CRANK SHOP Ski-Doo 1200 4-Tec Silencer only $449
Sno-Stuff Rumble Pack Silencers 3-5HP gain & 7-9lb weight loss Site SPECIAL Hot selling models listed at RIGHT
all come nickel plated only $239
popular models listed
all models made are available
Ski-Doo #4403C- 8 lb Weight Loss
(600 HO SDI / MX-Z, Summit, GSX, GTX 2004-06 ) #4408C- 8 lb Weight Loss
(all 800R , XP 08 to 09 ) i#4404C - 8 lb Weight Loss
( MX-Z / Summit Rev 800, 800 HO 2003-07 / MX-Z / Summit Rev 600, 600 HO 2003-07 /500SS / MX-Z, GSX, GTX 2004-07 /Summit Adrenaline, X, X-RS, 800 R Power Tek 2007 )
SKINZ Ultra-Q Silencers Site SPECIAL Hot selling models listed
priced the same
Polished Ceramic only $285 black Ceramic only $349 Please go to SKINS Protective Gear website to find additional part #'s you may require then email or call us here in Canada for exceptional pricing
Super-Q Silencers same product just louder,
see SKINS web site for part #
before ordering Site SPECIAL Polished Ceramic only $245 black Ceramic only $299
#2206C - 6 lb Weight Loss
( Fusion 600 HO Switchback, RMK, Classic 2006-07 / 600 HO IQ CFI, Switchback, LX, Touring 2007 / Dragon / RMK 700 HO, 600 HO IQ CFI, Switchback HO CFI, LX CFI, Touring CFI 2007 / IQ Shift / RMK 600 HO, IQ, IQ LX, Dragon IQ, Switchback, Dragon Switchback RMK, Dragon RMK 600/700 HO CFI, Dragon SP 2008-09 )
"Just got my CPI order from you, thank you! you saved me a ton because my friend who thought he was going to save time and money ordering direct just got his with a $75 UPS brokerage charge.
You rock bro, thanks again!" - Tony Vincent
Rev XP800R Single Pipe Performance Kits
( black ) $385
( chrome finish ) $450 Silencer ( black ) $199 *= IN STOCK
j Buy in Canada and Save!
CPI REV 800 Single Pipes 04-05 models $299 add $75 for Chrome finish
The pipe that gains you 9 HP will also save you 9 pounds in weight. This pipe is easy to install. Anyone can do it in 5 minutes. All you do is pull the springs, remove the old exhaust system, install the pipe and muffler, reattach the springs and drop the clickers. This pipe can be used with the stock muffler or any other after marker mufflers. This pipe is best in the higher altitudes.
CPI Ski-Doo ZX Twin pipes 01-02 800ZX models $575 97-99 670Summit X $535 add $125 for Chrome finish
This pipe has an average gain of 10 HP and is 3 lbs lighter than the stock pipe
Canada Wide On ALL JAWS Twins! through Sled-Werx Racing
Not Available for Stock XP
JAWS Rev XP 860 Twins
for 860 big bore only painted with glass packs only $845 painted with queit silencer only $895
All Jaws twin exhaust systems include
silencer/muffler and flanges
"Thanks for helping me with my JAWS exhaust order. I followed a friends referal and was Very satisfied with your service. This seems to be the norm from what I'm reading around on the internet.
Keep up the great work! " - Steve Humphries
JAWS 07-08 M & Xfire 1000 Twins with glass packs painted only $795
with Quiet Muffler $845
F1000 twins coming - order now
Recommended for 3000+ feet . Adds 25hp while maintaining stock rpm
JAWS 05-06 M7 & 07 M8 Twins
with glass packs painted only $795
with Quiet Muffler $845
M8 - must have for any M-8. A reliable set of pipes that are easily tuned. Includes popular twin silencers that allows for a lightweight, great sounding system
M7 - M7 for high altitude (above 3500 ft.) are loaded with 15+ hp and reach peak power at the stock rpm. There is no fuel control box required for the '05 models however we do recommend a fuel control box with the '06 models
JAWS 03-06 MC 900/1M/King Kat
900 Twins with glass packs painted only $795
with quiet muffler only $845
Tremendous throttle response and reach peak power at 7900 rpm. The twin pipes flow into a single canister that has deep exhaust note and exits easily out the stock location. This exhaust system functions best at altitudes above 2500 ft.
TNT 500SS, 600 & 800R paintedonly $285 Ceramic only $325
Easily sheds even more weight from this sled. Our silencer weighs only 5 lbs and gives a deep,
SPEEDWERX Z1 ECU Re-Mapping Base Maps - only $400 Multi-Map Re-Programming only $600
(includes remapping & map selector Dial allowing you to adjust between up to 4 different maps while riding) choose between
RPI-Z1-1 (210 HP 91 octane )
RPI-Z1-2 (260+ HP full race octane )
RPI-Z1-87 (177 HP 87 octane )
custom mapping is also available upon request
Z1 H5 Alloy Valve Springs (shown at RIGHT )
Will outlast the stock springs and are recommended when pushing Boost levels with your Z1 Monster
Z1 Lightweight Muffler (shown bottom LEFT )
Black - only $250 Ceramic - only $355
This is as simple as it gets for adding serious HP to your Z1 Turbo sled. We have developed our own software that will allow us to reprogram the stock ECU to adjust fuel, boost limits, timing and waste gate activation / deactivation RPM. With this software there are no limits to what we can do to unleash the most power from your Z1 Turbo. All of these great features allow us to produce up to 290+ HP on the stock Z1 Turbo
ECU mapping is available in 2 different forms. single map version were we can put any single map in your box, or our multi map function that allows us to run up to 4 different maps at one time and you can select on the go (real-time) which map you would prefer to run. Both set-ups look stock and can easily be hidden from your competition.
FOR HASSLE FREE CANADIAN ORDERS
you make deposit/payment with us here at SLED-WERX Racing and then MAIL your ECU directly to SPEEDWERX with a letter stating what you would like along with your name, phone # and that your ECU has been sent in for a 2KOOL Performance Order. After remapping SPEEDWERX sends your re-programmed ECU directly back to us avoiding you any brokerage fees or hidden border/customs expenses & delays!
"I've been ordering my SPEEDWERX parts from you for years and couldn't be more satisfied with your service!
Thank you for helping us Canadians Spenc! " - Jeff Freeman
SPEEDWERX FAT DADDY Ceramic Pipes -ZR only $535 includes painted y pipe -03-07 F7 pipes only $459 -05-06 F7/Sabercat We ran this pipe on Project FXR F7 -F1000/M1000 & Crossfire
pipe & Y pipe only $579 includes painted Y piple single pipes alone only $449 add $25 to pipe sets above to have Y pipe ceramic coated
-F1000 Ceramic FAT DADDY Single
pipe only $449
Ceramic Silencers/Mufflers ZR painted only $249 ZR ceramic only $355 F7 painted only $209
F7 ceramic only $314 F&M1000 Y Pipes - paintedonly $189
email us with The SPEEDWERX product part #'s/info for fast, efficent, and friendly Canadian service!
- Fat Daddy Single adds 16-17hp on F1000
( with BOONDOCKER )
- Y pipe alone adds 7-8hp on F1000
- Shed 10lbs with lightweight muffler
SPEEDWERX Firecat, M Series and Xfire TWIN Pipes includes cannister!
Ceramic only $1129
Painted only $715
11-12 hp gain on 700cc models
"Thank you for my first order. Had I known about your business years ago I can't imagine how much money and hassle I would have saved! My parts got to me sooner than I expected and the tracking #'s provided was a classy touch! Everyone in our area is raving up Sled-Werx so keep up the good work!" - Jerry Simmon
in Canada ON DYNOPORT
FREE US Shipping on DYNOPORT
DYNOPORT 4-Tec HEADER Ski-Doo 1200 3 into 1
only $599 ceramiconly $699 painted only $599
"For years my friends and I from Canada purchased alot of these products directly out of the US and paid very heavy hidden expenses ( brokerage fees, excessive shipping etc ). Since finding SLED-WERX Racing here at 2KOOL Performance we are all saving money, saving time and most of all we're treated like family or friends! Keep up the excellent work Spenc, you run by far the best parts service out there! " - Greg Jamison
DYNOPORT Polaris Dragon 800 CFI Big Volume Single Pipes ceramiconly $549 painted
only $449 162HP to stock sled
Please Note: If you want POWER then purchase products from One vendor. Do not mix match a pipe from one vendor with a silencer or Y pipe from another vendor or you just won't see positive results!
DYNOPORT Big Volume XP Single Pipes 2008 XP & Summit ceramiconly $549 low elevation
painted only $449 low elevation
DYNOPORT Big Volume Single Pipes ZX Chassis 800
03-05 Rev 600/800 (LEFT) ceramiconly $549 painted only $449
Big Volume Single only $549 (at RIGHT) #S2158 - low altitude
#s2401 - 4000' and above
"The folks at 2koolperformance are great. Spenc taught me a few things to make online ordering even easier. Service was great, very pleased with the way they do business. I would highly recommend 2kool as a great place to do business with great prices also!!! " - Bill Roszell
( 2 versions available) - High Volume Trail
(4-5 decibles over stock )
- Big Core Barker BIG CORE BARKER version is the
LOUDEST SILENCER AVAILABLE TODAY
(10+ decibles over stock ) ceramic only $349 painted only $299
Clients report 1-2mph gains and more consistant 1000' ice runs with these lightweight DYNOPORT silencers
Big Core Barker & High Volume Trail
ceramic $349 painted $299
XP 1200 4-Tec
High Volume Trail silencer
OR Big Barker ( your choice ) ceramic $499
" Got my order in great time as always Spenc, thank you! Ignore these jokers who are trying to copy you, they'll never be 2KOOL! " - Loyd Henderson
XP800R Big Flow Y Pipes up to 3.5HP gain - Will fit 2007 800R ceramic only $249 IN STOCK painted only $199
03-07 REV 800HO ceramic only $249
painted only $199
DRAGON 800 CFI Big Flow Y Pipes up to 3HP gain
Will fit stock pipe ceramic only $249 painted only $199
Big Volume Single Pipes ceramiconly $549 painted only $449
EMAIL US With any Dynoport Part # for incredible
Polaris 700-800 Pro X
twin pipes with silencer painted only $629
With air box mods and D&D BullsEyes these pipes produce 158HP at 8000-8200rpm
XCR 800 Triple Pipes
2002-2003 sets to fit stock silencer
only $699 ceramic only $999 pipe set with Dynoport silencer
only $974 ceramic only $1324
DYNOPORT Polaris 800 Edge / XC
twin pipes with silencer
painted only $579
DYNOPORT Polaris 600XC SP
twin pipes with silencer
painted only $579
in Canada ON BIKEMAN
Z1 POWER is Here! BMP
Z1ULTIMATE BOLT ON PERFORMER kit only $2850 (info at RIGHT)
BMP2012 Procross 1100Turbo
Charge Tube Kit only $229IN STOCK
FREE US Shipping on BIKEMAN
Best bang for buck parts grouped together for you in one. BMP intercooler and charge tubes, Cyclone controller, Divorced Downtube with Muffler, Cylinder Head Studs, Stage 2 Clutch Kit, Wastegate Mod, and Meth Injection Kit. All the right parts to give you something you can trail ride all day long, but if you show up at the lake, watch out Boyz!! 290-300hp!! $2850 with Powderlite style muffler, $2895 with Full Velocity Quieter Muffler.
Bikeman Performance is proud to release this new intercooler that is twice as thick as the stock 2” intercooler. It can be used on stock motors or racing applications up to 40 psi. The charge tube diameter is increased to 2.25” instead of the stock 2” tubes. And actually the stock upper cast charge tube is even smaller, so we replace the charge tubes all the way to the throttle body for maximum efficientcy and performance. 10-20 horsepower gains depending on boost and muffler.
Z1 charge tubes are very flimsy and made out of rubber. This becomes a problem at higher boost pressures, even on a stock machine. When put on the dyno you can watch the stock charge tubes expand an incredible amount. This increase in charge tube volume drops boost pressure and hinders performance. By switching to an aluminum charge tube your boost pressure holds strong, and more performance is a result. This is a must for machines with a boost controller, and expect to hold on a bit harder even with a stock Z1!
Z1 Turbo Prologger only $695
Dynojet CMD only $495 see above two items listed above
in our accessories section
Our newly developed fuel controller can easily increase your horsepower by simply clicking the buttons. 16 different power levels to choose from starting at the stock 177 hp. We have enhanced the timing curves at lower rpms to help accelleration and throttle response at the lower rpms. You can adjust the fuel settings if you add extra mods to the motor. You can achieve 210-220 hp on 91-93 octane fuel and with the max 21 psi of boost you can expect 250 hp on race fuel or our meth injection kit when used in conjunction with our muffler. Intercoolers and divorced downtubes will increase the power level even more to as much as 290-300hp with our wastegate mod
TURBO OUTLET MANIFOLD only $279(at LEFT) This outlet manifold for the stock turbo seperates the main outlet and the wastegates outlet for enhanced flow which inturn provides you with more horsepower. Fits the stock, Bmp and other aftermarket mufflers providing a 4-5hp gain over stock. Ceramic Coated and polished
Outlet Manifold & Muffler-BMP’s new dual outlet turbo manifold totally separates the main turbo outlets airflow and the wastegates airflow and joins them further down the tube for much increased airflow and horsepower. 15-20hp gains depending on boost and intercooler. The Outlet Manifold (divorced down tube) comes with your choice of mufflers, Powderlite or the quieter Full Velocity version. These mufflers are different than the standard muffler because the downtube is longer. All pieces are ceramic coated silver and polished
"I'll just say this, GREAT SERVICE! and If YOU weren't selling BIKEMAN's products I wouldn't be buying them period! Thanks for the great service on my order, BMP is lucky to have you
supporting them in Canada! "- Fred Rivals
BMP Z1 Meth Injection kit
only $549 This is kit allows you to run higher boost levels while using 91-93 octane fuels without detonation. Turn the switch on and when your boost goes above the set level the methanol in injected into the charge tube to prevent detonation.
Unleash the Beast in your Z1 with BDX Xtreme 68/52 Reverse gears only $219 IN STOCK
7-10+mph improvement over stock email us to order all the products you see email@example.com
BIKEMAN Ski-Doo 4 Tec Exhaust 3 Stage 4 Tec HEADER only $599 stock muffler mod $195 double Barrel Muffler $349
REV 800 Single Pipes SPECIAL $379 CAD adds 8-10hp
any BIKEMAN Performance part #
for fast, efficent Canadian price quotes- No Brokerage Fee's, no Hidden Expenses!
BIKEMAN DRAGON 800 CFI Stealth Pipes Link to pipe pics - CLICK HERE only $379
"Thank you for helping me with my BIKEMAN order. A friend of mine mentioned you guys were the first dealer in Canada selling BMP Products. The forums are 'dead accurate' you treat your clients like friends and service is exceptonal! "- Tim Lyons
BIKEMAN Arctic Cat Stealth Pipesiiiiiiiiiiiiii F6/M6/F7/M7$379
F & M 1000 $379
- adds 5-6hp on 600's
- adds 6-8hp on 700's
- adds 15hp to 800's with High Flow manifold
- adds 10hp to 1000's and 18hp total with BIKEMAN exhaust valve spacers
( listed below )
BMP BOLT ON POWER
F/M/Xfire 800 2007-2009 Bolt On Performer Kit ionly $875 Quiet Performer Kit ionly $2000 900 Big Bore Kit ionly $1949
BIKEMAN F8/F9 for big bored firecat app FAT AZZ Single pipes i only $379
M1000 & Xfire 1000 SPECIAL only $379
F/M/Xfire 1000 Bolt On Performer Kit ionly $1475 Quiet Performer Kit ionly $2795 BIG BAD 1200 Big Bore ionly $2195
BIKEMAN Y PIPES
for F700 , 800 and new CAT 800HO only $199
M & F series 1000 CATS only $199
XP - 800 Y Pipes
Carb and ETEC only $199
only $239 ceramic
f1000 is fine with the Y pipe unless you add air mods. If you add a timing key, you need to add fuel and if you add a pipe or pipe mod you need to add fuel. The M1000 is leaner than the F1000 and needs a regulator or fuel controller either way - BMP
Z1 TURBO Powder Lite Muffler ceramic only $299
This muffler is compact, light and easy to install. It elimates the restrictive intermediate pipe between the stock muffler and turbo and is enlarged and run through our straight louver baffled muffler. Our most popular muffler at 17 lbs lighter than stock and 10 horsepower stronger on a stock machine even! Ceramic Coated Silver and Polished. Available with 1 bung for stock application or 2 bungs if you plan to add another air/fuel sensor.
2012 Z1 Turbo Full Velocity Muffler ( 9lbs savings ) stainless ceramic coated only $399 reg stainless only $349
BIKEMAN Full Velocity Mufflers painted only $249 ceramic only $289
examples: F1000 ( far LEFT ) Mach Z/Summit SDI 1000 ( near LEFT ) + 2mph in 2500+ feet STALKER PROVEN!
BMP have spent countless hours on their Superflow dyno to assure the airflow in their mufflers is at the right level for no power loss. BMP mufflers make the same power as stock with alot less weight and a little more rumble. Get your sled on a diet today with a BMP Full Velocity Muffler
for Dyno Results and weight
on Mach Z 1000 Muffler
BIKEMAN 08/09 Polaris DRAGON 800 Silencers Saves 8lbs over stock muffler only $249
j Buy in Canada and Save!
FREE US Shipping on AAEN
"Quick, efficient and friendly service! Really apppreciate your help with my AAEN order. My riding group buys all their parts through you for sleds/atv's and our watercraft. No one in Canada compares!PS: thanks for the stickers " - Jeff Brown
AAEN PERFORMANCE NYTRO Mega Power Silencer 2008+ models Site SPECIAL only $439 reg $449 ceramic coated steel both inside and out and produces 144 hp at 8600 rpm, and max torque is above 93 lb-ft below 7500 rpm. 6 hp increase over stock with an additional 3 lb-ft of torque. With the "quiet core" installed, the power peaks at 142.5 at 8500 rpm, with 92 + lb-ft of torque below 7500 rpm. With the "quiet core" installed, sound level drops another 4 dB (A) (40%). The Aaen Mega Power Silencer for the 08 Yamaha NYTRO FX is 7 lbs. lighter than stock and is a direct bolt-on in place of the stock muffler. An additional bracket is included to hold the rear plastic cover in place.
AAEN PERFORMANCE NYTRO Double Step Header 2008+ models only $475 8-11HP from Header - add Mega Power Silencer for 14 HP
AAEN PERFORMANCE REV Single Power Pipes for 500ss, 600, 800, & New XP's painted only $399 ceramic only $475 AAEN's ceramic coating is done inside and out - one of only a few to do this
Lightweight Silencer (shown)
Including MXZ 550 FAN painted only $299 ceramic only $349 double core silencers , trail friendly!
NOTES: - save 5lbs with pipe alone on all REV models 800 REV's gain 6hp, 500 & 600 REV's gain 5hp With SILENCER - save 15lbs total on all REV models! 800 Rev's gain 8hp, 500 & 600 REV's gain 6hp REV Silencers meet USA dba noice law standards
AAEN PERFORMANCE MACH Z 1000 Silencer painted only $299
Saves 20lbs and provides 4hp improvement - according to AAEN
MACH Z 1000 Silencers do not meet USA dba noise law standards
AAEN PERFORMANCE RUSH 600 Power Pipes painted only $399 RUSH 600 double Core Silencer painted only $299 Saves 22lbs and provides 6hp improvement according to AAEN
ALL AAEN POWER PIPES &
Double Core Silencers
- Canadian Money at Par!
FREE US Shipping on SPI
SPI Ski-Doo 1200 4-Tec Header only $699 ceramic 10-12 HP gain, fits into STOCK silencer
"The companies you represent and promote here in Canada should be thankful because there is no business North of the Border that could even hold a candle to Sled-Werx Racing!
Proud to be a happy client as are all my riding buddies!
We really appreciate your dedication
to the industry and this Sport!" - Gilles Lesard
STRAIGHTLINE Rev XP Single Pipes
TNT/600HO SDI/800R & ETEC
ceramic only $449 painted only $399
XP 800R & ETEC Y Pipes ceramiconly $220 painted only $189 IN STOCK
Other Y Pipe models
03-07 REV 800HO ceramic only $220
painted only $189 improved mid-range hp and torque
TNT 500ss/600MX-Z & ETEC ceramiconly $220 paintedonly $190
j Buy in Canada and Save!
call or email us with product part #'s from the Straightline Performance website for fast, efficent, and friendly Canadian service!
STRAIGHTLINE REV 500ss-600/600SDI & 800HO & Powertek Single Pipes ceramic only $449 painted only $399
- adds 8-10 HP at 7800 on 800 H.O
- adds 10+ HP at 7950 rpm on 800 H.O Powertek
-adds 6+ HP at 7900-8000 rpm on 600 SDI
similar gains on 600 carb
STRAIGHTLINE Mach Z 1000 / Summit 1000 SDI Ceramic Single Pipes only $525
No fuel mapping required Combine with SPI silencer to lose 14lbs
STRAIGHTLINE Arctic Cat F8 & F1000
Single Pipes ( f1000 shown ) painted only $399
ceramic only $449
Pipe gains 5-8hp, Lose 3lbs with no heat shield, and no jetting changes required. Ceramic Coated for better under hood heat and sharp appearance. Use with SPI’s lightweight Silencer for a 8lb weight savings.
STRAIGHTLINE Lightweight Silencers - Ski-Doo 500ss, 600-800 REV, Mach Z 1000, XP, iincludes SDI models ceramic only $299 painted only $259
-REV model (far LEFT) ceramic REV 600/800
-MACH Z1000 model (near LEFT) ceramic MACH Z1000 only $299
Email us with your full name, full shipping address, year make model and what you would like a quote on - for fast, friendly service and support!
Both BIG BARKER and
QT Silencer versions come with dual BUNGS for readings
" Just Received the exhaust system! Thanks for everything, you guys were excellent to deal with! Thx " - Justin McCosham
D&D Z1 Turbo Stage 2 BIG BARKER closed course use - Loud save lbs, add 10-11HP over stock! Stainless body, with black thermo coated ends as shown in pic at LEFT Only $349 reg $379 NOTE- for Turbo models only
2009/11 Z1 Turbo Stage 1 QT
Silencer NOTE- for Turbo models only trail friendly Ceramic only $399 2012 1100 Turbo Stage 1 QT SilencerNOTE- for Turbo models only trail friendly Ceramic only $399 IN STOCK
2009/11 Z1 Turbo Stage 3 Straight Pipe
race only painted only $179 NOTE- for Turbo models only
2009-2011 Z1 Turbo Silent Choice/Electric Cut-Out provides for higher boost by bypassing stock silencer through variable opening , race & trail - billet Ypipe with electronic internal butterfly $599 with QT Stage 1 exhaust $998 2012 Procross 1100 Electric Exhaust $795
Z1 Turbo BIG INTERCOOLER KIT #1500-9206 2009-2011 with charge tubes $949 #1500-9207charge tubes for stock Intercooler $249 #1500-9209 2012 F/XF1100 w charge tubes $949 #1500-9208 charge tubes for stock Intercooler $249
Note: you must specify at time of order if you want
D&D charge tubes for STOCK intercooler
or BIG TURBO Kit Intercooler as they sell both ( same price )
This kit comes complete with cylinders, heads, domes, pistons, Y pipe, D&D powerlite Single Pipe, power valve block off, and boondocker. What a great sleeper!130hp Sno-Pro that sounds like a stock 500 but will give 800's a run from corner to corner! This package runs at 8600-8700 rpm's so stock gearing is good for 100mph. This set up ran 82 MPH in just 660ft at the Old Forge shootout giving 800 mods all the competition they wanted. Power valves can be added for even better low end power
D&D 720 PREDATOR
500 to 720 Big Power Motor Kit
complete with BOONDOCKER Nothing to send in as core, kit comes with everything needed to turn the SnoPro into a PREDATOR on the trail! kit with blockoff valves $2995
powervalves add $480 PREDATOR clutch kit $225 at RIGHT
CALL FOR CANADIAN PRICING
Single Pipes paintedonly $429 ceramic add $100 ceramic single pipe weighs 10lbs
M1000/Xfire 1000 paintedonly $429 BIG BORE 1200 Single Pipes painted only $429
The F1000 pipe makes great power all through the powerband.It makes it's best Hp @ 7800 rpm and will gain 10 hp over the stock pipe.Must add Boondocker for added fuel. D&D M8/F8 Single Pipes paintedonly $409 reg $429 IN STOCK ceramic add $100
D&D Silencers F & M 1000 / Crossfire ( shown ) M6/M7/M8/F8 painted only $279 ceramic only $349
BIG DOG BARKER F & M 1000 / Crossfire
painted only $279 ceramic only $349
These exhaust cans will save you up to 10 pounds from the stock exhaust cans and gain 2-4 HP depending on the model. The silencers fit to your stock exhaust pipe or to a D&D pipe, exit out the stock hole, and use stock gaskets and springs. CLICK HERE for recent pic and weight of D&D Ceramic F1000 Silencer
BIG DOG BARKER - Saves 11 pounds and can adjust back pressure for high alt.riding
D&D YAMAHA Exhaust 2011+ APEX Stainless Steel
Exhaust 5HP! only $379 PC5 map Available
YAMAHA 2011+ APEX MAX-REV Intakes
brings the REV's from 10200 up to 10800 and also increase HP. This set up along with the D&D BullsEyes installed in the top air box lid and the PC 5 Program for adding fuel adds over 12 HP gain.. Easy to install and look stock. Sold as a set of Four..
This New 2011+ Apex Silencer is a straight through design with a deep great bark! nice hp gains along with a
PC 5 programmer and D&D new MAX-REV intakes
SLED-WERX Exclusive COMBO SPECIAL D&D BullsEyes
D&D 2011+ Apex Perf Exhaust
D&D Apex MAX-REV Intakes
DynoJet PC5 - mapped for above 12+ HP for only $EMAIL
"It's taken 3 days to get through this entire site!
from your Online Specials page to Tuff Truck Depot , Dirt-Werx Racing for ATV's etc etc to finally Sled-Werx Racing (my personal favorite) and I will say this - There's reason so many Canadian businesses are running scared! You have built an absolute MONSTER with 2KOOL Performance! Just incredible! And what an enormus effort it must have taken! Great to see your hard work paying off for Canadians Coast to Coast." - Brian Kilborne
This pneumatic pump makes bottle refills quick and easy – no bottle chilling is required. Includes pump, air regulator/filter, hoses, fittings, nitrous filter, and scale
20lb Refill Station Site SPECIAL only $352 #ACC-N006
SITE TIP -Chill small bottle/freezer or snow, while keeping refill station bottle at room temperature ( warm ). Small bottle will refill easier / quicker for you
Includes 20lb Aluminum Refill Station, transfer hose, filter, and digital scale
MAKE SURE TO CHECK OUT OUR ACCESSORIES Page for an endless supply of guages and turbo/supercharger accessories
Buy in Canada and Save!
In North America!
On Nitrous Express
NX 2-Cylinder Twin Piranha Nozzle System #60002 P only $639 bottle heater recommended
Mach Z 1000 Wet Kits includes: Lightning Solenoids, fuel pump, 2.5lb bottle, stainless steel bottle bracket, nitrous and fuel lines, relay and wiring harness, WOT activation switch and Jetting from 20-30-40-50hp. # 60002 EFI P only $639 bottle heater recommended
For Online Nitrous Help Click Here NX expert on hand to help our clients
Client Erling Jensen running a firstname.lastname@example.org
NX 3-Cylinder Piranha Nozzle System # 60033P only $729 bottle heater recommended
4-Cylinder Piranha Nozzle Systems Carb # 60005P
EFI# 60007PBottle heater recommended only $739
NX -Nitrous pressure gauge #15508P only $37.99
-with flow-through adaptor (shown at top) #15509P only $59.99
-Fuel pressure gauge #15511P only $33.99
with flow-through adaptor
-Low pressure Fuel Safety Switch #15708P only $42.99 (shown at bottom)
AUTO METER 2 1/16" Nitrous Pressure Gauge mechanical #5728 only $109
electric #5774only $219
"Just wanted to send a quick note to say thanks a ton for this incredible business you have built here in Canada! My orders have all gone smooth and I've saved alot of money. My returning as a client has far more to do with the professionalism shown during the order process!
There is no where else in Canada where I would purchase! "- Trevor Goodson
NX Digital Progressive
Nitrous Controller Site SPECIAL #15835P only $309
The NX digital progressive nitrous controller is new from Nitrous Express. This unit was designed as a simple and cost effective means of allowing the aggressive use of nitrous power and putting it on the ground. A simplified wiring harness and easy to adjust controls makes this device a snap to install and use. The start percentage can be adjusted from 20% to 50% in 2% increments. The Nitrous build time can be adjusted from 0.0 (instant 100%) to 8.0 seconds in 0.5 second increments.
NX - Bottle heater only $219 reg $254 CAD
Site SPECIAL Bottle heater only $189 With purchase of any NX system
CANADIAN MONEY AT PAR
ON THIS PRODUCT
SPI/Holtzman Nitrous Systems Model Specific kits with all brackets
and instructions for each model All kits only $650 ( does not include bottle) example model kits: Yamaha: Nitro /Apex/Attack/Nitro/Phazer Ski-Doo: All REV/TNT/MACH Z 1000/600 SDI/All XP/MXZ500ss
Arctic Cat: All Firecats/F1000/M & Xire
Polaris: Dragon 700/800
-Generral kits range 30-45HP but can be increased with different nossils
-universal single nossel kits ( non make specific twin cylinder carb and EFI) $650 Bottles not included in kits 2.5 bottle $160 2.5 bottle/w siphone tube $160 Two nossil kits add$160
Shown ABOVE is the new patented
combination nitrous and fuel solenoid.
Drawing only 15 watts
- No one Provides More for Less when it comes to
ATV to TOP FUEL!
Please note : All Turbo/Supercharger Accessoires & Electronics including gauges and Programmers can be now found in our ACCESSORIES section -Accessories only $359 on PC5
NEW Yamah APEX 2011 PC5's
see our Accessories Section
Black Diamond Xtreme
Ultra-Light Ceramic Rotor
Arctic Cat - fits all Diamond Drive saves 2lbs of rotation mass!
only $249 IN STOCK
Must use BDX Black Ceramic Brake Pads
shown at RIGHT
Black Ceramic Pads only $49 IN STOCK
Black Diamond Xtreme
Ultra-Light Brake Rotor
Arctic Cat - fits all 2012+ sleds saves 1.5lbs of rotation mass!
only $90 IN STOCK
We Drop Ship throughout the United States! Wherever you are, we're there to help!
SPEEDWERX High Flow Intake ALL 03-06 Firecats & Sabercats,
ALL 05-2010 X-Fire, and M Series
2-3 HP on Firecat 700
3-4 HP on Xfire 1000
SLP BOOST Bottle only $40 #22-55 is only part # still available
this is a discontinuing item at SLP
The new SLP Boost Bottle helps correct reed valve pressure balance to improve low to midrange driveablilty, throttle response, fuel economy and horsepower. A must for stock or modified twins.
Hauck Powersports APEX / Attack Ram Air Lid
( shown top LEFT) only $259.00 with Accelerator only $559
FX Nytro Ram Air Lid
( shown bottom LEFT) only $159 must be used with Accelerator - together only $459
HP Fuel Acceleratoronly $309
Accelerate past the competition with this fuel remapping system. Just plug and play.
ONE STOP PERFORMANCE
ProCross/ProClimb 1100 Turbo
only $279.99 IN STOCK
BENDER Racing SRX Cold Air Intake Kit only $115 Canadian
Gain 5-6 hp in this slickly designed OEM-appearing Cold Air Intake for the SRX. Nice easy to install mod that performs great, and looks terrific.
Special clutch kit recommended to fully enjoy the performance this mod provides. Re-jetting is required, we have jet kits available for specify year, and model, and gutted or stock airbox.
Number pieces in packaging:1Kit
Number pieces in box:1
Color: Black Only
Saves 8lbs , Adds up to 6HP! Lightweight HI FLOW INTAKE kits #ACHFI-2 only $375
-03-06 Firecat/Sabercat 600-700
with 800 big bore engine
-05-08 M Series/Xfire 600-700
with 800 big bore engine
- ALL new 1000cc models
SPEEDWERX F-Chassis High Flow Intake only $67 IN STOCK
More air = More power it’s that simple.
Up to 6 hp improvement on 1000 cc models!
These intakes now come BLACK
no need to paint match to hide
NYTRO Supercharger Cold Air Kit MPI’s newest add on for the FX-Nytro Supercharger Kit. Works on all 2008+ Nytro models, including MTX, RT, RTX, XTX #HSA-8100 only $129
100% 6061 Aluminum Construction
- Complete Unit Weighs less than 1 pound
- New Mesh Filter included
- Testing shows this kit ADDS 1 TO 2 POUNDS OF BOOST when working the unit hard.
- 100% TIG Welded
- Increased Air Flow
EVOLUTION Powersports 2012+ Arctic Cat 1100 Turbo
Cold Air Intake
IN STOCK only $259.99 DOES NOT include
EVO ELBOW $36IN STOCK
Dyno tested and expertly designed cold air intake fits 100% under hood and under factory plastic. It eliminates the very troublesome stock air filter. The stock filter is supposed to draw from the area behind the windshield, but the fact is the hood/filter/ filter cover is so sloppy that much of the air it draws comes from under the hood right next to the exhaust manifold. The EVOPS intake allows you to draw all air from the dash area and breath through the factory Frogskiz mesh. This material is more than adequate for filtration in snow conditions. Best of all, on our Big Chute/Holeshot and Super Chute/Slingshot turbos, our intake makes 5 hp more than stock above 8000 rpms.
High Flow Airfilter only $46.99
MONEY AT PAR on ALL
BIKEMAN PERFORMANCE Products
when purchased at
SLED-WERX Racing here in Canada
BLACK DIAMOND Xtreme
Black Box Intake System For all Firecat , M-Series & X Fire sleds only $199
Lose 8 lbs and gain more power! This new airbox allows you to eliminate the stock airbox and all the ducting from your hood. Comes with a complete airbox assembly with waterproof outer fabric, a plastic covering to keep debris and snow out of the belly pan, and water repellant vent covers for your hood. Revamped for 08 - no hood removal necessary on this new design
Universal 3" round vents
#10003 $13 IN STOCK
Arctic Cat M-Series Air Intake
#F0024 $24IN STOCK
FROGZSKIN The FrogzSkin Patent Pending design produces a flexible vent that can be applied to contoured and curved surfaces. Simply drill the proper size hole and the industrial grade adhesives allow a fast and easy, peel-n-stick application. Keeps Snow Out & Lets Air In! The unique design increases air flow to reduce performance loss due to heat saturation
Please email us with any Frogzskin part # you require for quick Canadian price quotes
Example Pricing ski-doo XP Nose Vent Kit $52 clutch side kit ( 6pc ) $146 exhaust side kit ( 5pc ) $104
XR 1200 Nose Vent Kit $52 clutch side kit ( 4pc ) $86 exhaust side kit ( 5pc ) $97 REV ( 03-07)
Hood Vent Kit ( 4pc ) $59 IN STOCK clutch side kit ( 3pc ) $70 exhaust vent kit ( 2pc ) $58
Probreather only $139IN STOCK replacement filters $99
Proclimb/Procross Intake Filter Kit. 5lbs weight savings, gain 2 hp.Remove bottom side of air box and install to front nose piece. Also need to move air temp sensor down by the air filter. A must for grass Drags and also for the mountains for great weight savings!
ProCross/ProClimb 1100 Turbo
MAX AIR underhood Intake only $279IN STOCK
Great gains for drag and lake racing. If you want Max power out of your stock Turbo this set up is a must! Extensive high speed testing has been done, to find the best (highest pressure) location for the intake. New under hood Max Air intake for trail and mountain riding
D&D BullsEyes (6-pack) only $43 IN STOCK HOT ITEM
Add 6 bullseyes
to top of 2006-2011 Yamaha Apex
air box for up to 6hp! ( see picture at RIGHT ) Add Dynojet PC5 for up to 11HP! IN STOCK
PC5 Apex bullseye maps available
through Sled-Werx Racing
YAMAHA 2011+ APEX MAX-REV Intakes
brings the REV's from 10200 up to 10800 and also increase HP. This set up along with the D&D BullsEyes installed in the top air box lid and the PC 5 Program for adding fuel adds over 12 HP gain.. Easy to install and look stock. Sold as a set of Four..
SEE D&D EXHAUST SECTION ABOVE FOR COMBO
PRICING with NEW EXHAUST, PC5 and BULLSEYES
picture is for illustration only, kits do not come with twist ties and hose clamps
ULMER Racing NYTRO K&N Kit's includes filters, prefilters, 2 crank case vents only $255
Increase the low to midrange performance
5 hp and top end performance 3 hp with this K&N Filter package!
2014+ VIPER VENOM Air Box KIT only $299 (shown below)
2006-10 APEX / ATTAK Stealth Mod Air Box 3-4 HP on Top End
Does not require Fuel Mods
. only $225 2011 APEX Stealth Mod Air Box . only $225
2010-2011 Vector Stealth Mod Air Box 3-4 HP on Top End
Does not require Fuel Mods . only $225
We're Canada's Premiere TimbersledDealer!
on Timbersled Products
Please click on the Timbersled logo to the Left to be quickly directed to thier web site. Take down the part #'s you require then call us when ready to place your order. Example products shown below
TIMBERSLED M Series CAT Clean Air Intake kit only $275 IN STOCK -Adds 3HP , saves 8 lbs Kit Includes:Intake manifold, 2 snow-con air filters, 2 pre-filters & 5 improved hood screens
High Flow Air Horn Intake for 2007-09 600/700 HO CFI, 2008-09 800 HO #14-123 only $45.99
HIGH FLOW INTAKE KITS ( example shown at RIGHT )
DRAGON SPECIAL INCLUDES:High Flow Air Horn Intake, 2.5" Flow Rite for dash & Powder Snow Pre-Filter Kits for both right & left sides for 2008 700/800 CFI RMK & all 2009 IQ models except Touring/FST & 550/600 shift short tracks #14-128 $114.99
07 600/700 CFI / & 08 non RMK models INCLUDES: High Flow Air Horn Intake, 2 Air Vents with Snow Pre-Filter and 4 2" snap in Flow-Rites for 2007 600/700 CFI, 2008 600/700 CFI and 700 IQ and Switchback EXCEPT 700 RMK #14-127 ony $167 IN STOCK
06-09 600 HO Carb Intake KIT (INCLUDES: High Flow Air Horn Intake, 2 Air Vents with Snow Pre-Filter and 4 2" snap in Flow-Rites #14-126 $169
SLP High Flow Airbox For 700/900 IQ Fusion/Switchback/RMK 05-06 700/900 RMK/Switchback Site SPECIAL SPECIAL #14-285 only $305
05-06 700/900 Fusion
#14-288 only $305
sheds an amazing 12 lbs! adds 4hp!
This kit also comes with a new
aluminum belt gaurd that allows air in
and around the clutches for cooler running
and better consistency.
SLP XP High Flow Intake kit #14-129 only $75IN STOCK
This NEW High Flow Intake Kit for the Ski-Doo XP increases the air intake surface area by 33% to reduce the chance of the intake plugging in powder snow conditions. It is located higher than the stock intake and within reach of the rider so that any snow that collects on it can be easily wiped away. This kit consist of a molded plastic adapter that seals between the stock air box and the hood along with an intake grate that utilizes our pre-filter material that repels snow and water while passing air right through
SLP M8/M1000 High Flow Intake kit #14-299 fits 07-08 only $59 IN STOCK #14-305 fits 09+ only $59
All 'Dyno Proven' SLP products Available!
SLP Hot Air Elimination Kit
for Arctic Cat M-7 only $93
SLP Universal Pre-Filter material
14-160 13 3/8" x 7 1/4" $16.99
14-164 10 5/8" x 9 1/4" $16.99 *
14-253 18 x 18" $36.99
14-289 16" x 24" $39.99 * *= IN STOCK
These universal SLP Powder Snow Pre-Filters are perfect for custom intake areas on many modified sleds. They work extremely well in areas that are exposed to airborne powder snow. This unique filter repels snow and water yet passes air right through.
This new Footwell Vent Kit helps to effectively remove hot underhood heat from the chassis
SLP Hot Air Elimination Kits for Polaris IQ Chassis ( fits all models except FST ) only $66 (priced per side Left or Right ) 32-523 RIGHT side 32-534 LEFT side
SLP Hot Air Elimination Kits help reduce stagnant underhood hot air to maintain higher horsepower by delivering additional cold air intake
and hot air escape from the chassis.
Very important to keep clutches cool and to keep underhood exhaust temperatures down.
SLP Ski-Doo REV
Hot Air Elimination Kit only $76
This kit effectively forces cold air into the chassis via two Flow-Rite Intake Kits located in the rear of the shock tower. It then evacuates the hot air out of the chassis via an attractive brushed aluminum outlet grate
SLP Ski-Doo XP
Hot Air Elimination Kit #32-555 Right Side (Clutch) only $94 #32-556 Left Side (Exhaust)
only $114 IN STOCK
SLP Flo-Rite Intakes -2" rubber flange IN STOCK
-2.5" rubber flange
-2" snap in flange IN STOCK example application: 4hp gain to MACH Z 1000
with 2 Flo-Rites on main air box! only $22 each
Eliminate air intake restrictions by installing the Flow-Rite™ in the the dash or intake tract for more air box feed. The Flow-Rite™ is supplied with a powder snow pre-filter that repels snow and water, yet passes air right through. A must for modified sleds.
HOLZ 07-09 IQ/RMK Foot Rest Vent Kit
( shown at LEFT ) does not fit DRAGON only $77
07-09 IQ Front Shock Well Vent Kit
( shown at RIGHT ) only $67
Cutler Performance M Series Side Pannel Vents CP-004-1007 only $99
K&N Air Filters & Wraps from only $56
#SN-2580 only $56
#SN-2580PK only $19
On-site FROZEN THUNDER Forums member firecat do'n his 'thang'
TPI Low-Boy Valves only $39 sold in packs of 2
NOTE: dyno proven -Provides 4HP if put in Back of 800R air box across from Carbs
Provides 3HP put in same location on NEW Ski-Doo 600
TDR Hyper Tension Reeds Site SPECIAL Popular replacement reed examples: Arctic Cat 800/1000cc #223 $75 Ski-Doo 800 twin #228 $129
Polaris Dragon 700/800 #226 $129
state at time of order if for TURBO
- all TURBO reeds are thicker
To Order call (613) 925 4015
TDR “HYPER TENSION” REEDS are the hottest reed valves on the market today. These epoxy fiber reeds are made of the highest quality material
available. This material is custom designed by TDR to give the best possible performance and have a long working life-span.
The object of any race-tuner is to increase the power of their machine. The real trick to this fine tuning is to get a maximum performance gain with the smoothest possible power band.
Arctic Cat Triple #V3110-683A-3
Site SPECIAL only $339
D&D designed & dyno tested
gain 4+hp! #V3112-904-2 only $269
V-FORCE Reeds Site SPECIAL from only $279 Arctic Cat from only $279 Ski-Doo from only $279 Polaris
triples only $339 Yamaha #V3132-873F-2
Fits Polaris CFI HO 600/700/800
Fits Most Arcitc Cat models 03-07
including F5/6/7 and M, ZL/ZR #V3124-873B-2
Fits SKI-DOO 600/800 REV carb & HO
Fits 700 twin carbs & 600 SDI
Fits 600 ZX & 01-05 carb MXZ 700-800
Fits Most SKI-DOO Triples including
96-04 MACH Z, 97-99 MACH 1,
96-99 Formula III
Site SPECIAL only $339
VFORCE CARB BOOTS example
#RB123- fits all 2000-2007 twin ski-doo
( except 2000 round slide carbs ) only $89 pr set
XP 800R carb #V3122-873I-2 ( 2.5HP ) only $279 3HP XP 800R Etec #V3122-873J-2 ( 3HP ) only $279 3HP
SLED-WERX RACING client catch'n Big Air!
Power Reeds example pt # 555
2000-2006 Ski Doo 500ss only $79
"Parts arrived today, you guys are the Best. Thank you very much.
Can't wait to getter back together" - Ralph Kuhn
BOYESEN Rage Cage Reed Systems
popular examples Rev 600HO & 800HO pt #RAD84-2 IN STOCK only $279 RAD84-KIT only $425 Rev 600 SDI (INCLUDES all 04-07 models only )
(standard) pt # RAD86A-2 only $309 POWER PACKwith PowerWings
pt # RAD86A-KIT only $459 1000 SDI pt # RAD87-2 only $339 POWER PACKwith PowerWings
pt # RAD87-AKIT only $479
XP 800R Site SPECIAL 4HP gain midrange, 6HP gain Top End pt # RAD85a-2 only $275 POWER PACKwith PowerWings
pt # RAD85a-KIT only $449 reg $479 XP 800R w boots pt # RAD85F-2 only $309 reg $329 IN STOCK
XP 800R Etec pt # only $
F/M 1000 pt # RAD52-2 only $299
F/M 800 pt # RAD51C-2 only $275 2010+ F/M 800HO pt # RAD53-2 only $289IN STOCK
1000 SDI standard units
test proven in ADVANCED DYNO
135+ mph 05 MACH Z 1000
"Hey All, i just wanted to reach out and let everyone know that i have had multiple orders with 2kool Performance and never had an issue, in fact my lstest item not only saved me 100 bucks but also they allowed me to grab them after hours which kept me completely satisfied and allowed me to work on my latest 07 mach z 1000 project over this past weekend
All in all if your looking for the best price, best service & best response time to emails or questions your look is now over. there isn't any better in Canada so you're just burning yourself if you don't try them out
" - HCS Member NeonFXP
Supreme Tool Power Valve Bellow Style pricing for ZR 800/900,F6,F7, F8 & F1000, M7, M8, M1000 only $420 for set
Power Valve Springs Three different spring rates to choose from in the kit. Springs fit all Piston and Bellow style Supreme exhaust valve assemblies. Gives the option of fine tuning the opening rpm of your valves only $40 for set
We have incorporated the skidoo gas exhaust valve technology into a easy bolt on for the Arctic Cat ZR-800/900 , F6/M6-- F7/M7 and now the F-800/1000, M-1000 and Crossfire 800/1000 twins. There is no need to play with cables or the reprogramming of your cdi to change the opening rpm of the valve. You can adjust the opening rpm by adding or removing shims or different thrust springs. We have also added a pop up indicator on the front of the valve that simulates the opening and closing of the valve. This feature allows you to synchronize and adjust the opening rpm right on your jack stand. Assemblies are shipped pre calibrated ready to bolt on and ride. We do stock different spring combinations for finer tuning, please contact us if required.
The ZR models now require no alteration. The complete valve assembly is made of billet and comes with the plug in servo chip for the EFI. The billet valve blades will fit previous valve housings and are offered as an up grade for $165.00 for the set .Please call .
The F6/ F7/ M7, F-800 & HO-800 / 1000, M-1000 and Crossfire 800/1000 require no alteration.
The complete valve and housing assembly are made of billet. We also include a plug in chip to the ecu harness that allows you to remove the servo motor without defaulting the ignition timing.
NEW: F-1200 add $50.00
Supreme Tool Piston Style Valves
for 2007-20011 F8/M8 , F8/M8 HO, F&M1000, F&M1200 Big Bores only $480 for set all except 1200
( add $40 for big bore 1200 )
STM-77800RPV-P ( turbo ) only $305 set
STM-77800RPV only $269 set
We have upgraded our exhaust valve technology from a membrane bellow style actuator to a piston style actuator. A much simpler design that uses less components and eliminates bellow failure in big bore and turbocharged applications. Our piston mechanism stays lubricated by the engines 2 stroke oil sytem and is actuated by the exhaust pressure from the cylinder . Same design works well with naturally aspirated engines as well. We developed this valve design in the fall of 2010 and tested them on turbo charged, and naturally aspirated engines throughout the season with amazing results.You will love the throttle response gained. You can adjust the opening rpm by changing different thrust springs. Assemblies are shipped pre calibrated ready to bolt on and ride. We do stock different spring combinations for finer tuning- Kit # 78SPNG sold separately $40
This new piston style exhaust valve will adapt to your stock valve blades. We supply a locking clip that locks the two-piece valve assembly together and eliminates the two stock springs. Installation instructions and tool included.
Valves do not come polished as shown, they are blunt heat treated steel ( valves in picture are painted for picture value only )
XP 800R Billet Exhaust Valves only $165 for set
Billet valve for the new 800R SKIDOO motor. -heat treated billet steel valves that will not break. Made to the exact dimensions of the stock valve that will drop right in you 800R motor.
XP800 EXHAUST VALVE BLOCK OFF
Replaces the stock valves and leaves a smooth exhaust port roof.
A must have for turbo charging the 800R engine.
Made from 6061 billet aluminum. STM Product # 57VBO
BIKEMAN Exhaust Valve Spacers Dyno Proven!
for F6-F7 Carb models only $22 IN STOCK
for F1000 EFI only $26 IN STOCK
HOT ITEM! Best HP bang for the buck!
Add up to 7-8 HP on F1000 ( see no-brainer! - grab em! )
Our clients LOVE this product!
Best bang for the buck!
BIKEMAN XP 800R Y Pipe Torque Spacer Dyno Proven! only $32 IN STOCK for stock Y pipe only Works on XP800, 600SDI
More Low End Grunt!
-Adds 2ft-lbs of Torque!
+Gain 3 Midrange Horsepower!
-1.5 Peak HP Gain
E-TEC muffler sensor adaptor only $40 IN STOCK
Etech Muffler Sensor Adaptor: Is your E-Tec bogging out on long wide opens pulls since you installed an aftermarket muffler? The problem is how sensitive the e-tec motor is to heat. The aluminum finned design disapates heat to aid in cooling the sensor. Plus the simple adapter moves the sensor out of the extreme heat inside the muffler, allowing your machine to hold maximum RPM all the time. Simple and easy. Threads into your muffler, and simply thread the sensor into the adaptor.
Black Diamond Xtreme
Polished Billet Power Valve Plus only $175
800cc 1000cc 1200cc
Finally a kit that you will lose 4 lbs of unwanted weight, no more misadjusted cables, broken cables, or cable routing problems when you put after market pipes on your sled and still gives you the same or better performance the factory power valves. Comes with billet valve inserts, all hardware and electronic chip. Available for 1000cc, 800cc, 700cc and the D&D 1200 Big Bore engines. A must for turbo and NOS applications.
Black Diamond Xtreme
Oil Injections Block Off Kit Site SPECIAL only $29.99 IN STOCK
This kit will eliminate the oil injection on your 700, 800, or 1000cc Arctic Cat. Simply remove your oil pump, cable, and oil reservoir. This kit will bolt in place of the pump and allow you to safely run pre-mix.
(Ultimate Fuel Optimizer) Twins only $65 Triples only $99
Fits Mikuni carbs from 32 to 44mm. The UFO makes a normal round slide carb outperform the more expensive flat side carb by eliminating turbulence and increasing air flow and velocity. Normal gains are 3/4 to 1HP per 100 cc of engine displacement. (Rejetting and tuning are required )
Advance your timing
for more horsepower
Offset timing keys only $24 Arctic Cat EFI- 2 degree keys IN STOCK
Arctic Cat EFI- 2.5 degree keys IN STOCK Arctic Cat EFI- 3 degree keys IN STOCK Arctic
Cat carb 2 degree keys
Cat carb 3 degree keys IN STOCK
Ski-Doo SDI/XP 2 degree keys
MIKUNI main jets examples - 740, 760, 800, 820, 840, 860's
Monster Main jets only $10
MIKUNI .020" Needle Shims only $1.50 each IN STOCK
Fine tune your engine with the use of needle shims from Starting Line Products. These needle shims allow you to vary your needle clip positions in half step increments. Especially beneficial for the serious tuner to aquire every last ounce of performance. Fits all late model Mikuni rack style and Keihin PWK carbs. Sold per each
Multi Remote Mixture Control H-VARI * Vari Flow Multi Kit $228.99
H-VARIY * Vari Flow Multi
H-VARIP * Vari Flow Multi Kit
- Phazer $228.99
H-FIL * Atmospheric Inlet Filter $14.94
THUNDER PRODUCTS 'Easy Tune' - Pilot Air Screw Adjuster only $9.95 IN STOCK
No more special screwdriver needed. Fits all 38mm and 40mm Mikuni rack style carborators on Arctic Cat, Polaris and Ski-Doo.
THUNDER PRODUCTS 'Injector Perfector' On F7 models, adds 4-5 mph
on top end with quicker acceleration only $49
We used this product on our Fastest F7 in the World build
This simple system consists of a machined brass piece that the main jet is installed into. By installing it in-line, the precision sized hole of the main jet provides precision regulation of the fuel delivered to the injectors. And it werx!
A 'must' for all Arctic Cat 600-700 fuel injected models!
THUNDER PRODUCTS Dial-A-Jet fuel Induction System Accurate Jetting in Seconds! twin carbs from only $125 triple carbs from only $160 For 94 up Yamaha add $13 each to prices shown above - Those kits come with different direct replacement fittings
( no drilling into float bowls )
Click on logo below to choose which part # you require, then give us a call!
THUNDER PRODUCTS VIP - Velocity Intense Performance 38mm single only $69
38mm twin only $129
40mm single only $69
40mm twin only $129
PowerJet kit Adjustable PowerJet system Single Carb kit only $64.95 Twin Carb Kit only $119.95
Triple Carb kit only $179.99
HO 800 Motors - Xtreme 50mm Throttle Bodies. Add more air and get a 5 hp gain in power. This has been a great gain on the dyno with even better results in field testing. Much stronger on the bottom and midrange over the stock 48mm throttle bodies.
This is the Snowmobile industry's first ever aftermarket EFI throttle body. The CNC machined billet comstruction ensures accuracy within .001 tolerances for easy synchronization. The concept of larger throttle bodies is simple: more air & more fuel = more horsepower. The 58mm design bolts into the same place as stock throttle bodies and uses the factory throttle cable and throttle position sensor (TPS). These throttle bodies are avalible in a single injector or a twin injector patent pending design for naturally aspirated or turbo charged engines
Crank Shop Big Birtha T-Style Flate Slide Carbs 1045056 56mm $540 each 1045054 54mm $530 each
redesigned flat slide carbs for reed motors. Uses T-style custom slide* and custom needle. All other tuning parts are standard Mikuni. requires additional items as listed below: -Throttle Handle $74 -Throttle Cable
$42 3cyl - $72
Jamie Bellman heat'n up the blacktop! "Bellman Racing uses nothing but Crank Shop carbs."
HOLTZMAN ENGINEERING Tempa Flow II #14-237 only $179IN STOCK
#14-294 Polaris 600 HO Carb only $169
Up to 15% fuel mileage improvements along with crisper and cleaner throttle response & overall performance gains!
HOLTZMAN ENGINEERING ATACC Automatic Temperature &
Altitude Carburetor Compensator only $249
The ATACC uses the patented temperature compensation used in the TEMPA FLOW coupled with a patent pending baromaetric pressure adjustment, providing complete automatic fuel flow adjustment. For snowmobile applications the ATACC leans the fuel mixture at temperatures above - 20°F (-29°C)
Buy in Canada and Save!
Adjustable Fuel Pressure Regulator only $159 This adjustable fuel pressure regulator is absolutely neccesary when modifying your F6, F7, M6, M7, and X-Fire 600-700 EFI's. It will also work on your 800-1000cc X-Fire and M-Series sleds.
Allows you to crank up your fuel pressure to accomodate modifications such as pipes and big bores
Inline Fuel Reducer with gauge only $89
With this inline restrictor valve you can lower the fuel pressure at wide open to give you more power
NGK IRIDIUM IX SITE SPECIAL
ONLY $10.99 per plug
( 700-1000cc ) BR9EIX IN STOCKadd 2HP! replaces BR9EYA ( 1100 Turbo ) MR8AI9 IN STOCKadd 2HP!
DUAL ELECTRODE YAMAHA ( Vector / Rage/NYTRO/FX NYTRO ) CR10EK IN STOCK add 2-3HP! ski-doo( 800R XP )
BR9ECSIX replaces BR9ECS IN STOCKadd 2HP!
Test Proven to provide enhanced power,
acceleration, and crisper throttle response! Try these plugs once and you'll never go back
to regular plugs!
Same plug run in 133.9mph Project FXR F7
"Best service in the Aftermarket industry, PERIOD" HCS member - 87gtNOS
Black Diamond Xtreme 3oz Oil Change Kit w/2oz Silicone
( for Diamond Drive )
only $10 IN STOCK
12oz Reverse case Oil Change Kit only $14 IN STOCK ( shown at RIGHT)
We carry ALL BDX Xtreme products just email us with the part #'s you need
LEFT to RIGHT above: Seal Kit #50048only $18 Bearing Kit #50058only $69 Gasket #60184only $11
BRP XP-S 2-Stroke Full Synthetic High Performance Synthetic $189 Canadian (case of 3 US gallons) sold only by the CASE
XPS 2-Stroke Synthetic Blend High Performance Synthetic $159 Canadian (case of 3 US gallons) sold only by the CASE
A uniquely formulated low-ash 2-stroke fully synthetic injection oil -It meets the specific lubrication requirements of Ski-Doo snowmobiles and Sea-Doo watercrafts equipped with Rotax carbureted and SDI 2-stroke engines
A new premium 2-stroke synthetic blend -This 2-Stroke synthetic blend new formulation was developed specifically for Rotax E-TEC®, SDI and Power T.E.K.™ engines and delivers ultimate performance -It extends engine life and reduces smoke emissions and combustion deposits compared to conventional oils
SYN-SNO High Performance Synthetic $199 Canadian (case of 4 US gallons) sold only by the CASE
APV Synthetic High Performance Synthetic $165 Canadian IN STOCK (case of 4 US gallons)
sold only by the CASE
KLOTZ TC-W3 Techniplate $209 Canadian (case of 4 US gallons) sold only by the CASE
Klotz TC-W3 Techniplate has greater film strength than standard lubricants. Approved by the NMMA and engine manufacturers, it is a carbon-free and smokeless environmentally safe formula
RED LINE High Performance Synthetic (far LEFT) $209 Canadian (case of 4 US gallons) sold only by the CASE
A high performance all-synthetic formula used as injection or premix oil. The slipperiness of Red Line Oil not only eliminates build up on exhaust valves, but can produce up to 3% more power and can provide significantly longer bearing life. With lower ash deposit control it provides less smoke, cleaner spark plugs and cleaner pistons. Combined with anti-scuff additives it prevents ring sticking and scuffing under extreme temperatures. Recommended for stock to moderately modified snowmobiles.
RED LINE Race Synthetic (near LEFT) $295 Canadian (case of 4 US gallons) sold only by the CASE
Red Line Oil provides the best high-temperature protection from ring sticking and scuffing and produces up to 5% more power. It has shown up to 75% less wear than premium castor-based lubricants, and is exceptionally clean. A high performance synthetic designed to provide maximum power. Can be used as pre-mix or as an injection oil in milder conditions. The oil is used by Four Time World Champions, Wahl Bros. Racing.
Snow 2-C TCWIII High Performance Race Synthetic #44511 $279 Canadian (case of 4 US gallons) sold only by the CASE
Test Proven to add HP ditch your OEM 'sludge' because this stuff 'flat out' WERX!
ROYAL PURPLE Synchromax 1 US qrt only $14.39 IN STOCK
In house Test Proven mph Gains
when used as chain case lubricant!
Click on above Logo to Add Your Review
HP Injector Synthetic High Performance Synthetic $169 Canadian (case of 4 US gallons) sold only by the CASE
INTERCEPTOR High Performance Synthetic $199 Canadian (case of 4 US gallons) sold only by the CASE
DOMINATOR Race Synthetic $219 Canadian (case of 4 US gallons) sold only by the CASE
New AMSOIL HP Injector Synthetic 2-Cycle Oil is a precise synthetic formulation that exceeds the lubrication demands of modern two-cycle engines. It contains premium synthetic base oils and MAXDOSE additive system, providing superior performance in direct fuel injected (DFI), electronic fuel injected (EFI), and carbureted motors, as well as other recreational two-cycle equipment. Recommended for use as injection oil or at a 50:1 premix
Why pay over $10 more per gallon?
Buy from us and Save !
New AMSOIL INTERCEPTOR Synthetic 2-Cycle Oil is engineered spcially for power sports applications and those engines equipped with exhaust power valves. Specially forumulated to eliminate power valve deposits, ring sticking and plug fouling. Dramatically reduces wear on cylinders, pistons and bearings. Reduces smoke and odor and effectively extends engine life. Recommended as an injector oil or at a 50:1 mix ratio in carbureted, Electronic Fuel Injected (EFI) and Direct Fuel Injected (DFI) snowmobiles, personal watercraft, motorcycles, ATV's and jet boats
iNew AMSOIL DOMINATOR Synthetic 2-Cycle Racing Oil is a robust formulation specially engineered for unsurpassed protection in high performance two-cycle motors, both on and off the track. It contains heavier synthetic base oils that provide more lubricity for "on the edge" operation. DOMINATOR reduces friction and protects pistons and bearings subjected to the rigors of racing. DOMINATOR contains the right additives for clean motor operation. Recommended for use with exhaust power valves and high octane racing fuel. DOMINATOR also provides excellent protection at 50:1 premix or injection systems
We Drop Ship throughout the United States! Wherever you are, we're here to help! simply email or call today!
All Turbo/Supercharger & Electronics products including gauges
can be now found in our ACCESSORIES section -Accessories
Plug & Go Play Kits 08-present Nytro & Apex with Boost module $269 CND IN STOCK
ThumbBoost (Plug & Play) $69 CND IN STOCK
Testing the very latest products on the market is an important part of our SLED-WERX Racing division here at 2KOOL PERFORMANCE. In testing we provide our valued clients the most accurate and insightful product information possible.
We're not just into Sleds.... We're into EVERYTHING!
from the provided linked image below you will get to our main home page where you can then quickly be re-directed into the different active divisions of our
Performance Supply Business.
Looking to invest in a Guaranteed & Proven Profit Maker?
In just 5 years 2KOOL Performance Inc. became The World Leader
In Aftermarket Performance Product Availability - ATV to TOP FUEL
Our In-House 2KOOL CUSTOMS division has earned over 70+ national sponsorships
unlike any other performance related business in Canada!
Now, after more than a Decade of Dominating the Powersports Industry
to take 2KOOL Performance to the next level.
Contact us today to discuss this unique investment opportunity.